Bosch AdvancedMulti 18 Originalbetriebsanleitung Seite 19

Technical Data
Cordless multifunction tool
Article number
Oscillation speed rate
preselection
Constant electronic control
Soft start
AutoClic accessory holder
Rated voltage
No-load speed n₀
Oscillation angle on left/right
A)
Weight
– without auxiliary handle
– with auxiliary handle
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
B)
ure during operation and
during storage
Recommended rechargeable
batteries
Recommended battery char-
C)
gers
A) Depending on battery in use
B) Limited performance at temperatures < 0 °C
C) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 85 dB(A); sound power level
93 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Working without the Auxiliary Handle
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑4 (sanding),
EN 62841‑2‑11 (sawing):
2
Sanding: a =6 m/s , K = 1.5 m/s
h
Cutting with plunge cut saw blade: a
2
s ,
Cutting with segment saw blade: a
Working with the auxiliary handle
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑4 (sanding),
EN 62841‑2‑11 (sawing):
2
Sanding: a = 6 m/s , K = 1.5 m/s
h
Cutting with plunge cut saw blade: a
Bosch Power Tools
AdvancedMulti 18
3 603 A04 0..
●
●
●
●
V= 18
−1
min 10000−20000
° 1.4
kg 1.5 (1.5 Ah)–
1.8 (6.0 Ah)
kg 1.6 (1.5 Ah)–
1.9 (6.0 Ah)
°C 0 to +35
°C −15 to +50
PBA 18V...W-.
AL 18...
2
,
2
= 16 m/s , K = 1.5 m/
h
2 2
= 14 m/s , K = 1.5 m/s .
h
2
,
2
= 20 m/s , K = 2.5 m/
h
2
s ,
Cutting with segment saw blade: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and accessories, keeping their hands warm, and
organising workflows correctly.
Rechargeable battery
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
Battery Charge Indicator on the Power Tool
The battery charge indicator on the power tool indicates the
state of charge of the battery or an overload when the power
tool is switched on.
LED
3 × continuous green light
English | 19
2 2
= 16 m/s , K = 1.5 m/s .
h
State of charge
≈ 75–100 %
1 609 92A B1B | (19.12.2024)