Bosch AdvancedMulti 18 Originalbetriebsanleitung Seite 18

18 | English
contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an elec-
tric shock.
Use clamps or another practical way to secure and
u
support the workpiece to a stable platform. Holding
the workpiece by hand or against your body leaves it un-
stable and may lead to loss of control.
Only use the power tool for dry sanding. Water entering
u
a power tool will increase the risk of electric shock.
Warning: Danger of fire! Avoid overheating the work-
u
piece and the sander. Always empty the dust con-
tainer before taking a break from work. Sanding dust in
the filter bag or vacuum cleaner filter can spontaneously
ignite under unfavourable conditions, such as when
sparks are created when grinding metal. This risk is in-
creased if the sanding dust is mixed with paint or poly-
urethane residue or with other chemical substances and if
the workpiece is hot as a result of prolonged work.
Keep hands away from the sawing area. Do not reach
u
under the workpiece. Contact with the saw blade can
lead to injuries.
Clean the air vents on your power tool regularly. The
u
motor's fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
When changing the application tool, wear protective
u
gloves. Application tools can become hot when used for
prolonged periods of time.
Do not treat the surface you will be working on with
u
any fluids that contain solvents. Poisonous vapours
may develop due to the materials heating up when being
scraped.
Take particular care when handling scrapers and
u
blades. The accessories are very sharp. Danger of injury.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not modify or open the battery. There is a risk of
u
short-circuiting.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery in the manufacturer's products.
u
This is the only way in which you can protect the battery
against dangerous overload.
1 609 92A B1B | (19.12.2024)
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. nails, clamps). It is also suit-
able for working on soft wall tiles and for dry sanding and
scraping of small areas. It is ideal for working close to edges
and flush with surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) AutoClic lever for unlocking tools
(2) On/off switch
(3) Battery charge indicator
a)
(4) Rechargeable battery
a)
(5) Battery release button
(6) Oscillation speed rate preselection thumbwheel
(7) Ventilation slots
(8) Auxiliary handle (insulated gripping surface)
(9) Thread for auxiliary handle
(10) Tool holder
(11) 180° light band
a)
(12) Plunge cut saw blade
a)
(13) Sanding plate
a)
(14) Sanding sheet
a)
(15) Depth stop
a)
(16) Segment saw blade
(17) Handle (insulated gripping surface)
a)
(18) Extraction hose
a)
(19) Extraction outlet
a)
(20) Dust extraction
(21) Clamping lever for dust extraction system
a)
(22) Dust extraction adapter
a) This accessory is not part of the standard scope of delivery.
a)
Bosch Power Tools