Werbung
Verfügbare Sprachen
Verfügbare Sprachen
new, good quality cell the discharged
close to the rated capacity
11.
Refresh
It's a special combination of several charge and discharge
cycles. The charger tries to maximize the capacity of older cells,
which were not used for an extended period of time. It can be
used
to initialize/form
shortly to select Refresh mode. The discharge current is strictly
connected to the charge current. For the 200mA and 500mA
charge current the discharge current Will be 200mA, every other
higher current will cause higher discharge current which is
400mA. When the entire process is completed the full battery
will occur next to corresponding
also indicated by 'End' label on LCD. For a new, good quality
cell the discharged
rated capacity
12.
Test
In this mode the charger will charge the battery first, then
discharge and charge again. The current mechanism is the
same as in the refresh mode —the discharge
connected to the charge current. For 500mA max charge current
the discharge current will be set to 200mA, every higher current
will cause to set the discharge current to 400mA. When the
entire process is completed the full battery will occur next to
corresponding
'End' label on LCD. For a new, good quality cell the discharged
capacity
should be very close to the rated capacity
cell.
mode.*
new
batteries.
capacity
of the cell.
mode.*
slot - C4 Finished process is also indicated by
capacity
of the cell
Press
slot - C4. Finished process is
should be very close to the
should be very
the
MODE
button
current is
of the
13
Werbung
