Silvercrest SWKD 100 A1 Bedienungsanleitung Und Sicherheitshinweise Seite 23

heated blanket. There is a risk of
injury.
Children must not perform clean
or maintain the heated blanket with-
out supervision. There is a risk of
injury.
The heated blanket is not intended
for use in hospitals or for commer-
cial use. This poses a risk of inju-
ries and/or damage to the heated
blanket.
not poke the heated
blanket with needles or sharp
objects. There is a risk of electric
shock.
not switch on the heated
blanket whilst folded or bunched
up. The heated blanket may oth-
erwise be damaged.
blanket is used for several hours,
we recommend setting the lowest
temperature on the control unit
to avoid overheating the heated
part of the body and possibly bur-
ning the skin as a result.
Do not use when wet! Otherwise
there is a risk of electric shock.
This heated blanket may only be
operated with the control unit
specified on the label. The heated
748.546_SWKD100_2023-06-26_02_IM_Lidl_LB8_OS_content.indd 21 748.546_SWKD100_2023-06-26_02_IM_Lidl_LB8_OS_content.indd 21
Do
Do
If the heated
1
Important safety instructions
blanket may otherwise be dam-
aged.
The electric and magnetic fields
emitted by this heated blanket
could possibly interfere with the
functionality of your pacemaker.
However, the levels are far below
the permissible limits: electric field
strength: max. 5000 V/m, mag-
netic field strength: max. 80 A/m,
magnetic flux density: max. 0.1
milli-Tesla. Therefore please con-
sult your physician and the man-
ufacturer of your pacemaker before
using this heated blanket.
Do not pull, twist or kink the cables.
The heated blanket may otherwise
be damaged.
The cable and the switch of the
heated blanket may pose a risk
of catching, strangulation, tripping
or being stepped on if positioned
incorrectly. The user must ensure
excess cable and cables in general
are positioned safely.
Frequently check this heated blan-
ket for signs of wear or damage.
If signs thereof are detected, the
heated blanket was used improp-
erly or will no longer heat up, it
must first be inspected by the man-
ufacturer before being switched
on again.
GB/IE 21
28.06.23 12:17 28.06.23 12:17