HANDLING THE APPLIANCE
POWER
•
Press the button of ON/OFF (10), to select power on / off the appliance.
SPEED
•
Press the button of ON/OFF (10), to power on the appliance.
•
Press the button of Speed (7), to select the fan speed.
•
3 speed for select: (Low - Mid - High)
MODE
•
Press the button of ON/OFF (10), to power on the appliance.
Press the button of MODE (8), to select the fan mode.
•
•
3 mode for select: (NORMAL / NATURE / SLEEP).
•
The default mode is NORMAL, and the SLEEP/NATURE mode with the indicator be light up.
TIMER (0.5 - 7.5 HOURS)
•
Press the button of ON/OFF (10), to power on the appliance.
Press the button of TIMER (6) to the desired time period (0.5-7.5 Hours)
•
•
It will now remain in operation until the selected period of time runs out.
•
After the timer runs over, the device will turn off.
OSCILLATION
•
Press the button of ON/OFF (10), to power on the appliance.
•
Press the button of OSCILLATION (9), appliance will swing from Left to Right.
REMOTE CONTROL
•
All the function above can be setting by remote control.
•
Install 2*AAA batteries (Not included) into the remote.
CLEANING AND MAINTENANCE
Before cleaning the appliance always disconnect the power plug from the receptacle.
•
The appliance, the power cord and the power plug should not be immersed in water or other
liquids when you are cleaning them. Clean them with a dry cloth.
If it is very dirty, the outside of the appliance can be wiped carefully with a moist cloth and then
•
dried carefully. Make sure that no moisture penetrates into the interior of the appliance.
•
Do not use any harsh cleaners, steel brushes, scouring powder or other hard objects to clean
the appliance as these can cause scratches on the surfaces.
Clean the appliance regularly.
•
•
Never use solvents, benzene or oil-based cleaners as these can damage the housing.
•
Re-tighten visible screw connections on the appliance regularly in order to ensure that the
device is functioning properly.
Fig. 1:
Fig. 2: