Assembling The Appliance; Operation The Appliance - Homcom 824-009 Bedienungsanleitung

Assembling the appliance:

- Install the five castors on the base (20).
- Install the body (17) into the base (20) , and use the base lock nut (22)
to screw on the base tightly.
- Connect power connection line (15 ), and put it into the main body (17),
and tight up by holder fixed screw (16).
- Install the back grill (7) , and tight up by grill lock nut (6) on the motor
cover (12)
- Install the blades (5) on to the motor shaft (8), and anticlockwise by
blade lock nut (4).
Installation
- Be sure to remove all packaging material from inside
the appliance.
- Ensure that the fan is switched off from the supply mains before start
any installation or assembly operation.
- The appliance should be used with its base fitted.
- Install misting board (1) on the front grill (2) and screw up by misting
board lock screws (3).
- Put the front grill (2) and back grill (7) together, and
screw to fasten by grill ring,and tight up by grill lock nut (11).
ATTENTION!
• Make sure the products unplugged from the mains before filling or
refelling the water tank.
• Only use water in the water tank. Do not add any chemicals, oils or
other additives.
• Only use cold or lukewarm water in the water tank. The water must not
be warmer than 40° C.
Place the fan on a dry and stable surface and insert the plug on the
socket; the unit will emit a short "BIP" sound indicating that pow
er is supplied. For your convenience the unit can be operated by
using control panel in the main body or by using remote control
included.

Operation the appliance:

2