EuroLite DMX IP SPLIT 8 Bedienungsanleitung Seite 12

Please read the safety warnings carefully and only use the product as describe in this manual to avoid
accidental injury or damage.
Intended use
• The 8-fold splitter is designed for reliable distribution and boosting of DMX512 signals. The device is rated IP65
and can be operated and mounted outdoors. The unit features one DMX input and eight galvanically isolated
DMX outputs as well as a feed-through terminal for connection to an additional splitter.
• This device is designed for professional use in the field of event technology, e.g. on stage. Only use the device
according to the instructions given herein. Damages due to failure to follow these operating instructions will void
the warranty! We do not assume any liability for any resulting damage.
• We do not assume any liability for material and personal damage caused by improper use or non-compliance
with the safety instructions. In such cases, the warranty/guarantee will be null and void.
• Unauthorized rebuilds or modifications of the device are not permitted for reasons of safety and render the
warranty invalid.
• If a serial number label is affixed to the device, do not remove the label as this would make the guarantee void.
Danger due to electricity
• To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the
device.
• Do not immerse the product in water, this will destroy it. Furthermore, this could cause a lethal electric shock!
• Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current
breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable
is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never
defeat the protective ground of a mains cable. Failure to do so could result in damage to the device and possibly
injure the user.
• The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
• The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
• Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
• Unplug the device during lighting storms, when unused for long periods of time or before cleaning.
• Do not expose the device to any high temperatures, direct sunlight, strong vibrations or heavy mechanical
stress.
• Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required
when the device or the mains cable is visibly damaged, when the device has been dropped or malfunctions
occur.
• Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any
areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free
and moistened cloth. Never use solvents or aggressive detergents.
Warning – risk of injuries
• Make sure that the product is set up or installed safely and expertly and prevented from falling down. Comply with the
standards and rules that apply in your country.
• For commercial use the country-specific accident prevention regulations of the government safety organization for
electrical facilities must be complied with at all times.
• If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer. Improper
installation can result in bodily injury and or damage to property.
• The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions.
• For overhead use, always secure the device with a secondary safety attachment such as a safety bond or safety net.
• Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
12 • EN