Werbung
Verfügbare Sprachen
Verfügbare Sprachen
on the backrest and two on the booster). When you unfold the
car seat again, the backrest (2) cover can be easily removed.
4. To remove the booster cover, release the two elastic bands un-
derneath the booster (4), and first remove the cover around the
armrest. The booster cover can then be easily removed.
To reattach the covers, follow these steps in reverse order.
CLEANING
It is important to use an original seat cover only since the cover is an
essential part of the function. You may obtain spare covers at your
retailer.
NOTE The cover may only be washed at 30 °C with a delicate
wash program otherwise it may result in discoloration of the
cover fabric. Please wash the cover separately from other
laundry and do not dry in the dryer or in direct sunlight!
You can clean the plastic parts with a mild detergent and warm water.
NOTE Please do not use chemical detergents or bleaching
agents under any circumstances!
PRODUCT CARE
To guarantee that your car seat provides the maximum protection, it
is essential to comply with the following points:
• All major components of the car seat must be regularly checked
for damage. The mechanical parts must work without problems.
• Make sure that the car seat is not jammed between hard parts
such as the car door, seat rails etc., which can damage it.
• If e.g. the car seat is dropped, it must be tested by the manufac-
turer before being used again.
EN
39
Werbung
