CYBEX Gold SOLUTION G2 Benutzerhandbuch Seite 33

REMOVING THE CAR SEAT FROM THE VEHICLE
(6) (8)
(5)
Perform the installation steps in the reverse order.
1. Unlock the ISOFIX Locking Arms (5) on both sides by pushing the
ISOFIX Release Buttons (8) and pulling them back simultaneously.
2. Pull the seat away from the ISOFIX Anchorage Points (6).
3. Remove the car seat and push the ISOFIX Locking Arms (5) fully
back into the storage position.
ADJUSTING THE HEADREST
The height of the headrest can still be adjusted while the car seat
��
is installed in the car.
(4)
(9)
EN
(10)
max.
2 cm
33
(5)
i-Size Booster Seat
100 cm – 150 cm
(1)