CYBEX Gold SOLUTION G2 Benutzerhandbuch Seite 32

 NOTE On some vehicle seats made of sensitive materials, the
use of car seats may leave marks and/or cause discolouration.
To prevent this, you can place a blanket or towel or similar
underneath the car seat to protect the vehicle seat.
4. Push the two ISOFIX-locking arms (5) into the ISOFIX-anchorage
points (6) until these lock into place with an audible "CLICK".
5. Use the adjustment handle (1) and push the car seat against the
vehicle seat until it is fully aligned with the backrest.
WARNING The backrest of the car seat must make contact with
2
the backrest of the vehicle.
If the headrest of the vehicle is in the way, pull it upwards to its
��
furthest extent or remove it completely (except in rear-facing
vehicle seats).
6. Ensure the seat is secure by trying to pull it out of the ISOFIX-
anchorage points (6). The green safety indicators (7) must be
clearly visible on both sides of the seat.
7. In case the seat is used without ISOFIX, it can be stored away on
the bottom of the seat.
EN
32