CYBEX Gold SOLUTION G2 Benutzerhandbuch Seite 31

INSTALLING THE CAR SEAT IN THE VEHICLE
(5)
Always ensure that...
• the backrests in the vehicle are locked in their upright position.
• when installing the car seat on the front passenger seat, adjust
the vehicle seat as far back as possible without affecting the belt
routing.
WARNING Do not use any load bearing contact points other
2
than those described in the instructions and marked on the child
restraint.
WARNING By using ISOFIX, a connection to the vehicle is
2
created which improves the stability of the car seat. Your child
still needs to be secured with the three-point belt of the vehicle.
1. Use the adjustment handle (1) under the booster (4) and pull the
two ISOFIX-locking arms (5) to their furthest extent.
2. Now twist the ISOFIX-locking arms (5) 180° so that they are fac-
ing the direction of the ISOFIX-anchorage points (6).
3. Place the car seat on the appropriate seat in the car.
(1)
EN
(6) (8) (7)
31
(4)