Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EnGLIsh
HEAVY-DUTY CORDLESS ROTARY HAMMER DRILL
DCH416, DCH417
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
No‑load speed
No‑load Impact rate
Single impact energy (EPTA 05/2009)
Maximum drilling range in steel/wood/
concrete
Maximum diameter for cores
Optimum drilling range in concrete
Optimum drilling range in concrete for cores
Tool holdler
Collar diameter
Battery Type
Weight (without battery pack)
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
Noise values and/or vibration values (triax vector sum) according to
EN IEC 62841‑2‑6:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
28
WALT one of the
e
DCH416
DCH417
V
54
DC
1
min
0–725
‑1
bpm 0–4200
0–4200
J
4.5
mm 13/32/32
13/32/32
mm
127
mm
10‑24
mm
52‑80
SDS plus® SDS plus®
mm
54
Li‑Ion
kg
4.1
MHz
433
mW
0.03
dB(A)
96
dB(A)
104
dB(A)
3
=
m/s²
8.0
m/s²
1.5
=
m/s²
6.7
m/s²
1.5
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
54
(relevant for vibration), organisation of work patterns.
1
EC‑Declaration of Conformity
0–725
Machinery Directive and Radio Equipment
Directive
4.5
127
Heavy-Duty Cordless Rotary Hammer Drill
10‑24
DCH416, DCH417
52‑80
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015+A11:2022,
54
EN IEC 62841-2-6:2020 +A11:2020.
Li‑Ion
These products also comply with Directive 2014/53/EU and
4.1
2011/65/EU.For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
433
file and makes this declaration on behalf of D
0.03
96
Markus Rompel
104
Vice-President Engineering, PTE-Europe
3
D
WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
01.04.2023
8.0
DECLARATION OF CONFORMITY
1.5
THE SUPPLY OF MACHINERY (SAFETY)
6.7
1.5
Heavy-Duty Cordless Rotary Hammer Drill
D
WALT declares that these products described under Technical
e
Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020 +A11:2020.
These products conform to the following UK Regulations:
e
REGULATIONS 2008
DCH416, DCH417
WALT at
e
WALT.
Werbung
