Service & Maintenance; Servicing / Maintenance; Repairs; Troubleshooting - Spring Professional Gebrauchsanweisung

BA Wärmeplatte PROFESSIONAL 38 1300 00 10.qxp_GA 05.02.25 11:43 Seite 19
8 Service / Maintenance
The service and maintenance are limited to the Cleaning as described in chapter 6.
9

Repairs

Repairs may be executed by the manufacturer or authorized personnel only. In case of questions contact your
dealer or our customer service.
10

Troubleshooting

Disorder
The warming tray does not heat.
If you have any problems or questions, contact your sales or service center or directly:
Spring International GmbH
Höhscheider Weg 29
42699 Solingen
Germany
www.spring.ch
E-Mail: service@spring.ch
Possible cause
1. No supply voltage/insufficient
supply voltage
2. Internal defect
Troubleshooting
1. Insert the mains plug of the
device into a suitable socket.
Make sure that the power outlet
carries the required voltage.
Assure that the appliance is
switched on.
2. The appliance is defective.
Contact your sales or service
center.
19