Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
and operation and operation of the machine.
13. Provide for adequate room lighting at your workplace or
for adequate lighting of the immediate work area.
14. When fitted with laser no exchange with different type
of laser is permitted. Repairs shall only be carried out by
the laser manufacturer or an authorized agent.
15. Refrain from removing any cut-offs or other parts of
the workpiece from the cutting area whilst the machine is
running and the saw head is not the rest position.
16. Never stand on this tool. Serious injuries could occur
when this tool tips over or when coming in contact with the
saw blade.
17. Never use the mitre saw near flammable liquids,
vapors, or gases.
18. Remove all nails that may be in the workpiece to
prevent
sparking that could cause a fire.
19. To avoid fire or toxic reaction, never use gasoline,
naphtha acetone, lacquer thinner or similar highly volatile
solvents to clean the mitre saw.
20. Keep the saw with proper footing on a table to decrease
noise and vibration.
21. Always use the designated carrying handle for
transportation.
DECLARATION OF CONFORMITY
We hereby declare, under our sole
responsibility, that the FELISATTI brand
products described in this manual comply
with the following standards or standard
documents: EN61029-1:2009, EN61029-
2:2009, EN55014-2:1997+A1+A2, EN61000-
3-2:2006+A1+A2, EN61000-3-3:2008 in
accordance with EU Directives 2006/42/EC,
2006/95/EC, 2004/108/EC, 2002/96/EC
Jordi Carbonell
We reserve the right to make technical changes 09/2012
Santiago López
7
Werbung
Inhaltsverzeichnis
