Snap-On CTGRS8806 Bedienungsanleitung Seite 6

Using damaged or incorrect bits or accessories can
cause flying particles.
• Do not use chipped, cracked or damaged bits or
accessories.
• Use bits and accessories rated at tool RPM (product
specific) or higher.
• Securely tighten bits and accessories in the chuck
before operating the tool.
Flying particles can cause injury.
Avoid contact with the sharp edges of the bits and
accessories.
• Keep body parts away from the sharp edges of the bits
and accessories.
• Handle the sharp edges of the bits and accesssories
with care.
• Remove the bit from the tool before cleaning or
sharpening.
Contacting the sharp edge of the bit or accessory can
cause injury.
Battery Pack Safety
Messages
Risk of explosion or fire.
• Do not store the tool and battery in locations where the
temperature may reach or exceed 120°F (49°C).
• CTC131/CTCA131/CTCEU131/CTCJ131 charger will
not charge battery when temperature is below 32°F
(0°C) or above 113°F (45°C).
• Do not incinerate the battery, even if severely damaged
or completely exhausted. The battery may explode in
fire.
• Cover the battery pack terminals with heavy adhesive
tape after removing the battery pack.
• Do not attempt to destroy or disassemble the battery
pack or remove any of its components.
• Do not charge battery pack using an engine generator
or DC power source.
• Charge battery pack in a well ventilated area.
Explosion or flames can cause injury.
Risk of electric shock.
• Do not disassemble the battery.
• Do not short circuit the battery.
• Charge battery pack only with Snap-on brand chargers
for specified battery packs.
• Disconnect battery pack when not in use, before
servicing and when changing accessories.
• Do not charge battery pack using an engine generator
or DC power source.
Electric shock or fire can cause injury.
ZCTGRS8806CE Rev. A
Risk of burn.
• Battery leakage may occur under conditions of extreme
usage or temperature.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
• Ensure the switch is in the off position before inserting
battery pack.
Inserting the battery pack into power tools that have
the switch on invites accidents.
• When battery pack is not in use, do not place it in a
clothing pocket.
Battery leakage or sparks may cause burns or fire.
Risk of short circuit and fire.
• Do not short battery pack.
• Do not touch the terminals with any conductive
material.
• Avoid storing battery pack with conductive materials
such as nails, screws, coins, and other metallics
objects.
• Do not carry battery pack in aprons or pockets that
contain conductive objects.
Short circuit can cause fire and severe burns.
Safety Rules for
Battery Disposal
The RBRC™ Seal on the lithium-ion battery contained in
this product indicates that Snap-on is voluntarily
participating in an industry program to collect and
recycle these batteries at the end of their useful life.
Snap-on's involvement in this program is part of its
commitment to protecting our environment and
conserving our natural resources.
FCC Regulations
This device complies with Part 15, Subpart B of the
FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
6
(12/20)