12 www.aeg.com
5.12 Child safety device
This function prevents an accidental op-
eration of the hob.
Activating the child safety device
1.
Touch
not set the heat settings.
2.
Touch
shows the symbol
safety device operates.
3.
Touch
Deactivating the child safety device
1.
Touch
not set the heat settings.
2.
Touch
shows the symbol
3.
Touch
Overriding the child safety device for
one cooking session
1.
Touch
display shows the symbol
2.
Touch
3.
Set the heat settings in less than 10
seconds. You can operate the hob.
4.
When you deactivate the hob, the
child safety device operates again.
The child safety device function
locks the hob and oven at this
same time.
Automatic Switch Off times
Heat setting
Stops after
6. HOB - HELPFUL HINTS AND TIPS
WARNING!
Refer to "Safety information"
chapter.
6.1 Cookware for induction
cooking zones
In induction cooking, a powerful
electromagnetic field almost in-
stantly generates heat inside the
cookware.
to activate the hob. Do
for 4 seconds. The display
. The child
to deactivate the hob.
to activate the hob. Do
for 4 seconds. The display
.
to deactivate the hob.
to activate the hob. The
.
for 4 seconds.
-
6 hours
5.13 Residual heat indicator
The residual heat indicator comes on
when a cooking zone is hot.
WARNING!
There is a risk of burns from re-
sidual heat.
5.14 Automatic Switch Off
The function stops the hob
automatically if:
• all cooking zones are off.
• you do not set the heat setting after
you start the hob.
• you cover a sensor field with an object
(a pan, a cloth, etc.) for longer than 10
seconds. The sound operates until you
remove the object.
• the hob gets too hot (e.g. when a sau-
cepan boils dry). Before you use the
hob again, the cooking zone must be
cool.
• you use incorrect cookware.
on and after 2 minutes the cooking
zone stops automatically.
• you do not stop a cooking zone or
change the heat setting. After some
time
comes on and the hob stops.
See the table.
-
5 hours
4 hours
Cookware material
• Correct: cast iron, steel, enamelled
steel, stainless steel, a multi-layer bot-
tom (marked as correct by the manu-
facturer).
• Incorrect: aluminium, copper, brass,
glass, ceramic, porcelain.
-
-
1.5 hours
comes