Control Board - EuroLite AKKU IP Flat Light 1 Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or select a DMX channel mode.
MENU
ENTER
pressing Menu. The functions provided are listed in the following sections.
Menu
Menu level 2
level 1
Addr d001-d512
3CH, 4CH,
CHnd 6CH, 8CH,
10CH
SLAU SL.AU
SP-- SP00-SP99
Pr-- Pr00-Pr30
ASC- AC00-AC99
FAdE FA00-FA99
FLAS FL00-FL99
rL-- r000-r255
GL-- G000-G255
bL-- b000-b255
UL-- U000-U255
SoUA SO.UA
oF10/oF30/oF6
LEd
0/oF90
nodE nod0-nod4
The main menu is accessed by pressing Menu. Browse through the
UP
menu by pressing Up or Down. Press Enter in order to select the
desired menu. You can change the selection by pressing Up or Down.
DOWN
Press Enter in order to confirm. You can leave every mode by
Description
DMX address setting
Setting DMX channel mode
Slave Mode
Select the desired program speed
S00 – S99 (increasing)
Preset colors
Switching colors
AC00-AC99 (with increasing speed)
Fading colors
FA00-FA99 (with increasing speed)
Strobing colors
FL00-FL99 (with increasing speed)
Dimmer intensity of red LED color
000 – 255 (increasing)
Dimmer intensity of green LED color
000 – 255 (increasing)
Dimmer intensity of blue LED color
000 – 255 (increasing)
Dimmer intensity of white LED color
000 – 255 (increasing)
Sound controlled mode
Display shutoff
Shuts off the display after about 10, 30, 60 or 90 seconds
Dimmer speed (step response)
node0: Response characteristics of LEDs
27/36 00108467, Version 1.0