Tamiya DB02 CHASSIS Bedienungsanleitung Seite 29

RIC CAR BODY PARTS SET
CAUTION
Read carefully and tuny understand
the instructions before commencing
assembly.
•When assembling this kit, tools in-
cluding knives are used. Extra care
should be taken to avoid personal
injury.
'Read and follow the instructions
supplied with paints and/or cement. if
used (not included in kit).
Keep out of reach of small children.
Children must not be allowed to put
any parts jn tnejr mouths, or pull Vinyl
bags over their heads. Sensibly dis-
pose of the leftover parts immediately.
41M
*Cut off using scissors or a modeling knife.
Preparing body for painting
0
o
Wash the body thoroughly with detergent
in order to remove any oil, then rinse well
and allow tn air dry.
This mark denotes numbers for Tamiya
Paint colors Paint body from inside using
polycarbonate paints.
TAMIYA POLYCARBONATE PAINTS
PS-I / White
/ Metallic blue
PS-31 / Smoke
0112@2012TAMlYA
{hoars
Trimming
*Make 6mm holes.
Dust cover
*Make 3mm holes.
Wing
*Choose
desired setting.
Painting body
PS-I
White
*Apply stickers in numbered order.
ps-16
Metallic blue
(BJÄ)
Mask Off window areas using masking tape (available
separately).
(4)
*Paint metallic blue using polycarbonate
paint has dried. remove masking tape and pajnt
remaining arca white.
OBody
*Antenna hole
*Cut away.
cutting line according to
*Remove protective coating from body and
applystickers(j) -
PS-16
Metallic blue
(3)
*Mask off areas
semi-gloss silver anodized aluminum. Also, mask off
outside of body.
paints. After
(b)
*After paint has dried, remove masking tape and paint
remaining area red.
TOM"S
TAMIYA
by TOMS racing team
SSS_
*Cut away.
Paint this side.
ps-16
Metallic blue
PS-I
White
9
to be painted blue violet then
DB02LeonisBody (11052830)