HIKMICRO E03 Kurzanleitung Seite 14

CHAPTER 7
Upgrade Device
1. Connect the device to your PC via the supplied USB
cable, and select USB Drive as the USB mode in the
prompt on the device.
2. Unzip the upgrade file and copy it to the root
directory of the device.
3. Disconnect the device from your PC.
4. Reboot the device and then it will upgrade
automatically. The upgrading process will be
displayed in the main interface.
Viewing Device Information
Go to Local Settings > Device Settings > About to view
the device information.
Setting Date and Time
Go to Local Settings > Device Settings > Time and
Date to set the time and date, and press
MAINTAINING CAMERA
and exit.
Restoring Device
Go to Device Settings > Device Initialization > Restore
Device to initialize the device and restore default
settings.
Initializing Storage
Go to Device Settings > Device Initialization > Format
Storage to initialize the storage.
Save Operation logs
The device can collect its operation logs and save in
the storage only for troubleshooting. You can turn
on/off this function in Local Settings > Device
Settings > Save Logs .
to save
If there are files, make sure that the files has been
backed up before formatting. Once the storage is
initialized, data and files cannot be recovered.
English
12