HIKMICRO E03 Kurzanleitung Seite 130

cold or hot environments. This is a normal part of operation
to ensure optimum performance for your camera.
Using Environment
Make sure the running environment meets the requirement of
●
the device. The operating temperature shall be -10 °C to 50 °C
(14 °F to 122 °F), and the operating humidity shall be 95% or
less.
This device can only be safely used in the region below 2000
●
meters above the sea level.
Place the device in a dry and well-ventilated environment.
●
DO NOT expose the device to high electromagnetic radiation
●
or dusty environments.
DO NOT aim the lens at the sun or any other bright light.
●
When any laser equipment is in use, make sure that the
●
device lens is not exposed to the laser beam, or it may burn
out.
DO NOT aim the lens at the sun or any other bright light.
●
The device is suitable for indoor and outdoor uses, but do not
●
expose it in wet conditions.
The level of protection is IP 54.
●
The pollution degree is 2.
●
Laws and Regulations
Use of the product must be in strict compliance with the local
●
electrical safety regulations.
Transportation
Keep the device in original or similar packaging while
●
transporting it.
Keep all wrappers after unpacking them for future use. In
●
case of any failure occurred, you need to return the device to
the factory with the original wrapper. Transportation without
the original wrapper may result in damage on the device and
the company shall not take any responsibilities.
DO NOT drop the product or subject it to physical shock. Keep
●
the device away from magnetic interference.
Emergency
If smoke, odor, or noise arises from the device, immediately
●
turn off the power, unplug the power cable, and contact the
service center.
Legal Information
© Hangzhou Microimage Software Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the
Product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The
information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the
latest version of this Manual at the HIKMICRO website
(www.hikmicrotech.com).
Please use this Manual with the guidance and assistance of
professionals trained in supporting the Product.
Trademarks
and other HIKMICRO's trademarks and logos
are the properties of HIKMICRO in various
jurisdictions.
Other trademarks and logos mentioned are the properties of their
respective owners.
128