Beeper RECUL Montageanleitung Seite 11

3. PRECAUTIONS OF USE
Before using this system, please read the following instructions attentively:
• You conform to the rules in force of gour country for the installation and the use of this product.
• Preserve the objects of small out of reach children.
• After a long exposure to the sun, let cool the system before re-use.
We thank gou for taking the following advice before the installation of the system:
• For gour comfort and security, please respect the following instructions related to the installation of this product.
• The system functions under tension 12V continuous. Be sure tension of the vehicle and polarity of each wire
(usea digital multimeter to locate it, as well as a lamp test to locate the wire of tachometer).
• Check before the installaion if all the elements of the vehicle function correctly such as contact & driving starting,
lighting of the codes, fires and headlights, indicators, heating, air conditioning, locking of doors, etc Check after
installation that all these
• Connect the sons only bu splice/welding without using thimbles. The bad contacts can create serious dysfunctions
of the system and the vehicle also. Take care that all the sons passing in tight places are protected bg adhesive
tape to avoid ang excessive torsion and degradation of plastic protection of the wire with risk of bad contacts. If the
vehicle is equipped with a airbag take care of not to disconnect the battery from the vehicle, nor to connect without
certainty the wires.
Multiplexed vehicles
The system is compatible with the multiplexed vehicles. All the necessary information with connection are on sons
with normal polarity (about)on which does not forward a data (multiplexed BUSCAN,VAN or another coding).You
should not imperatively cut or touch a multiplexed wire. IN ALL CA, IT USELESS AND IS DISADVISED CUTTING A
WIRE OF ORIGIN OF THE VEHICLE.
OR NEGATIVE FORWARDING
same elements function.
YOU MUST ONLY MAKE
BY THIS WIRE.
ONE SPLICE AND RECOVER THE POSITIVE SIGNAL