Sungrow SG 110CX Schnelle Installationsanleitung Seite 2

EN
Contents may be periodica ly updated or revised due to product deve opment. The information in this guide is subject to change
without notice. In no case shall this guide substitute for the user manual or related notes on the device
Make sure to read over, fully understand and strictly follow the detailed instructions of the user manual and other related
regulations. Visit http://wwvv sungrowpower.com/,
page to view or obtain the user manual
All operations can be performed only by qualified personnel, that must be trained in the installation and commissioning of the
electrica system, as well as the dealing with hazards, have know edge of the manual and Of the oca regulations and
directives.
Before installation, check that the package contents are intact and complete against the packing list. Contact SUNGROW or
the distributor in case of any damaged or missing components
The cable must be intact and well insulated. Operation personnel must wear proper personal protective equipment (PPE) al
the time
Any violation could result in personal death or injury or device damage, and will void the warranty.
Safety
Please follow the safety instructions related to the PV strings and the utility grid. Otherwise, SUNGROW shall not be held liable
for any damage caused
A DANGER
Lethal voltage!
PV strings will produce electrical power when exposed to sunlight and can cause a lethal vo tage and an electric shock
Only qualified personnel can perform the wiring Of the PV panels.
All electrical connections
Only with the permission of the utility grid, the inverter can be connected to the utility grid
Do not open the enclosure at any time. Unauthorized opening will void guarantee and warranty claims and in most cases
terminate the operating license
When the enclosure lid is removed, live components can be touched which can result in death or serious injury due to
electric shock
A WARNING
All the warning labels and nameplate on the inverter body must be clearly visible and not be removed, covered or pasted.
A CAUTION
Risk Of burns due to hot components!
Do not touch any hot parts (such as heat sinks) during operation
A NOTICE
Only qualified personnel can perform the country setting
Unauthorized alteration of the country setting may cause a breach of the type-certificate marking
choose "PV Inverters" and search for the device model on the"Products" tab
must be in accordance with loca and national standards.
Only the DC switch can safely be touched at any time.