Sungrow SG 110CX Schnelle Installationsanleitung Seite 13

Step3 Enter the identity verification
screen after the Bluetooth
established.
IDENTITY VERIFICATION
"user"
A NOTICE
• The user name IS "user" and the initial password is "pwl 111" To ensure account security, please change the password
as soon as possible
• Reset the protection parameters if the country setting is incorrect. Otherwise, fault may occur
• In European countries (regions), such as Netherlands, Sweden, Denmark, whose grid code complies With EN50549,
select the parameter EN50549_1
• In the Brazilian region, set the country code to "Brazil" Selecting "Brazil 230" or "Brazil 240" will cause setting failure.
Step5 If the inverter is initialized, the APP automatically
Date and time
Inverter state
PID function state
Power flow cha
Real-time power
Navigation bar
•Screenshots in this manual are based on the Android
connection is
(LV grid connection) Or EN50549
SGIIOCX
2019/05/22 14:15
PIO wing
30.726 w
Power Yield today
45.5 479.4
Home page
system V2.1 6, and the actual
Step4 After finishing the settings, tap TUNR ON
DEVICE at the upper right corner and the device
will be initialized. The App will send start instructions
and the device will start and operate.
INITIALIZE
use previous configuration
B/ Reg•on
2 (MV grid-connection)
turns to its home page.
Total yield
Power generation
30,056.6
Power
interfaces
ON DEVCE
PROTECTION
curve
may differ.