General Description; Extent Of The Delivery; Functional Description; Overview - Parkside Palp 20-Li B2 Originalbetriebsanleitung

General description

An illustration of the most impor-
tant functional components can
be found on the front fold-out page.

Extent of the delivery

Carefully unpack the trimmer and check
that it is complete:
• Cordless air pump
• 3 universal valve adapters
• Carrying case
• Instruction manual
Battery and charger are not
included.
Dispose of the packaging material cor-
rectly.

Functional description

The cordless air pump is intended for infl at-
ing and defl ating large-volume infl atable
items for household use.
Please refer to the descriptions below for
information on how the operating elements
work.

Overview

1 Air inlet opening
2 Air exhaust opening
3 LED work light
4 On/off switch
5 Handle
6 Guide rail (not visible)
7 Valve adapter a, b, c
8 Rechargeable battery
8a Battery charge level indicator
8b Button for the charge status
display
9 Release button
10 Charger

Technical data

Cordless air pump ................PALP 20-Li B2
Nominal voltage U ..................... 20 V
Air volume ................................ 70 m
Weight (operationally ready)
.....................................approx. 0.85 kg
Weight (without battery)...............0.45 kg
Sound pressure level
(L ) ..................... 72.27 dB, K
pA
Sound power level (L
measured .............83.27 dB, K
Vibration (a ) ........1.63 m/s
h
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/Frequency
band ....................2400 - 2483.5 MHz
Max. transmission power ....... ≤ 20 dBm
Levels of noise and vibration were deter-
mined according to the standards and reg-
ulations in the declaration of conformity.
The specifi ed total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specifi ed total vibration value and the
stated specifi ed noise emission value can
also be used for a provisional assessment
of the load.
GB MT
= 3 dB
pA
)
WA
= 3 dB
WA
2 , K= 1.5 m/s
3 /h
19