KEB COMBICOM Installationsanleitung Seite 9

USB Serial Converter
1. Introduction
1.1 General information
Before working with the unit the user must become familiar with it. This includes especially
the knowledge and observance of the safety and warning directions. The pictographs used
in this instruction manual have following meaning:
1.2 Validity
This manual as well as the specified hardware and software are developments of the Karl
E. Brinkmann GmbH. Errors and omissions excepted! The Karl E. Brinkmann GmbH have
prepared the documentation, hardware and software to the best of their knowledge, however,
no guarantee is given that the specifications will provide the efficiency aimed at by the user.
The Karl E. Brinkmann GmbH reserves the right to change the specifications without prior
notification or further obligation. All rights reserved.
The information contained in the technical documentation, as well as any user-specific advice
in spoken and written and through tests, are made to best of our knowledge and information
about the application. However, they are considered for information only without responsibi-
lity. This also applies to any violation of industrial property rights of a third-party.
Inspection of our units in view of their suitability for the intended use must be done generally
by the user. Inspections are particularly necessary, if changes are executed, which serve for
the further development or adaption of our products to the applications (hardware, software
or download lists). Inspections must be repeated completely, even if only parts of hardware,
software or download lists are modified.
Inspection by the
user
GB - 4
Danger Indicates danger to life by electric current.
Warning Indicates possible danger to life or danger of injury.
Note Indicates tips and additional information.
Application and use of our units in the target products is
outside of our control and therefore exclusively in the area
of responsibility of the user.