KEB COMBICOM Installationsanleitung Seite 13

Installation:
1. The *.inf-file must be assigned once to the system on the PC.
2. The assistent for new hardware opens automatically, if the converter is connected
to a not yet configured for USB serial converter.
3. The USB-inf-file is located in a „USB driver package". The „USB driver package"
can be downloaded under www.keb.de  Download  Search for: „USB driver
package". Extract the „USB driver package" files after the download
4 Set the path in which the "kebcdc_win7.inf" file is found.
5. Continue installation. Ignore the warning for the Windows compatibility test and
„continue installation".
6. Finish the installation
Computers with Windows 7 do not ask for a driver because a ST Electronic driver
is automatically installed by the system. The function is given, but is recognized
as USB converter, not as KEB unit. If required it can be replaced manually.
With the KEB-USB converter the parameter files can not be read out by
COMBIVIS 5 from F5.
GB - 8
The installation must be made separately for each USB port.