Instructions On Environmental Protection - Wilfa Innobot Anleitung

INSTRUCTIONS ON ENVIRONMENTAL PROTECTION

• The following information is only applicable when
discarding this robot, and is not a daily operation
instruction: Chemical substances contained in the
built-in lithium-ion battery of this product will pol-
lute the environment. Please remove the battery
before you discard the machine, and hand it over
to a professional battery recycling station for cen-
tralized disposal. Steps to disassemble the battery:
• Let the robot run until it is low in power and cannot
be cleaned without touching the auto-clean base.
• Turn the robot off.
• Disassemble the bottom shell of the robot.
• Press the buckle and pull out the connector plug
of the battery, then take out the battery.
• Remove the battery cover plate and take the
battery out.
Note:
• When disassembling the battery, make sure that
the battery is exhausted and operated away from
the base.
• Please disassemble the whole battery pack
together, and do not damage the battery pack
casing, in case of short circuit or leakage of
dangerous substances.
9
EN