Assembly Of The Filter - Bwt Rtm Cs S-500 Bedienungsanleitung

2.

ASSEMBLY OF THE FILTER

1
2
3
4
5
CONSTRUCTION & RÉNOVATION
Remove the diffuser and cover the opening of the tube with adhesive
tape.
Check that the drain valve is closed. Fill the pump with water until the water level
is 5 cm above the laterals.
Pour the sand (granulometry 0.6/1.25) in carefully to avoid damaging the laterals.
Remove the tape and put the diffuser back in position.
Fit the o-rings into the grooves on the bulkhead fittings.
Wrap Teflon 4 times around the pressure gauge threading and screw it into the
multi-port valve having first removed the plug.
2021/01 - Indice de révision : I - Code : 26690
17/48