Atlas Copco LUM 25 PR05-P Original-Produktanweisungen Seite 7

LUM25 PR05/07/10-P
Warranty
Contact the Atlas Copco sales representative
within your area to claim a product. Warranty will
only be approved if the product has been installed,
operated and overhauled according to the Operat-
ing Instructions.
Please also see the delivery conditions applied by
the local Atlas Copco company.
ServAid
ServAid is a utility for providing updated product
information concerning:
- Safety instructions
- Installation, Operation and Service instructions
- Exploded views
ServAid facilitates the ordering process of spare
parts, service tools and accessories for the product
of your choice. It is continuously updated with in-
formation of new and redesigned products.
You can use ServAid to present content in a spe-
cific language, provided that translations are avail-
able, and to display information about obsolete
products. ServAid offers an advanced search func-
tionality of our entire product range.
ServAid is available on DVD and on the web:
http://servaidweb.atlascopco.com
For further information contact your Atlas Copco
sales representative or e-mail us at:
servaid.support@se.atlascopco.com
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products
sold by Atlas Copco.
For more information, consult the website
http://www.atlascopco.com/.
Choose Products - Safety Data Sheets, and fol-
low the instructions on the page.
Decommissioning
Recycling instruction
When a product has served its purpose it has to be
recycled properly. Dismantle the product and recy-
cle the components in accordance with local legis-
lation.
Batteries shall be taken care of by your national
battery recovery organization.
© Atlas Copco Industrial Technique AB - 9836 0990 04
Technical data
Technical data
Noise and vibration emission
LUM 25 PR05 – P / -PR07 – P
Noise (according to
PN8NTC1.2)
Measured sound pres-
sure level
Determined sound
power level
Spread in method and
production
Vibration (according
to ISO 8662-7)
Measured vibration
value
Spread in method and
production
LUM 25 PR10 – P
Noise (according to
PN8NTC1.2)
Measured sound pres-
sure level
Determined sound
power level
Spread in method and
production
Vibration (according
to ISO 8662-7)
Measured vibration
value
Spread in method and
production
Declaration of noise and vibration
emission
These declared values were obtained by laboratory
type testing in compliance with the stated stan-
dards and are not adequate for use in risk assess-
ments. Values measured in individual work places
may be higher than the declared values. The actual
exposure values and risk of harm experienced by
Safety Information
dB(A)
70
3
2
m/s
< 2.5
dB(A)
71
3
2
m/s
< 2.5
7