Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DEEBOT will tell you something is wrong with an alarm indicator light and sounds.
More detailed support is available through the ECOVACS App and online.
No.
Malfunction
DEEBOT is not charging.
DEEBOT
cannot
return
to the
2
Docking Station.
DEEBOT gets stuck while
3
working and stops.
DEEBOT returns to the Docking
4
Station
before
it has
finished
cleaning.
Possible
Causes
DEEBOT
is not switched
ON.
DEEBOT has not connected
to the Docking
Station.
The battery is completely
discharged.
The Docking Station is not correctly placed.
DEEBOT is tangled with something on the floor
(electrical wires, curtains, carpet fringing, etc.).
When the battery gets low, DEEBOT
automatically
switches
to Return to Charger
Mode and returns to the Docking Station to
recharge
itself.
Working time varies according to floor
surface, room complexity
and the Cleaning
Mode
selected
5. Troubleshooting
Solutions
Switch
ON
DEEBOT.
Be sure that the robot's Charging
connected to the Docking Station Pins.
Re-activate
the battery. Switch ON Place DEEBOT on
the Docking Station by hand, remove after charging for 3
minutes, repeat 3 times; then charge normally.
Refer to section 3.2 to correctly
DEEBOT will try various ways to free itself. If it is
unsuccessful,
manually
remove the obstacles
This is normal. No solution necessary.
This is normal. No solution necessary.
Contacts
have
place the Docking
Station.
and restart.
21
EN
Werbung
