Bosch AdvancedShear 18V-10 Originalbetriebsanleitung Seite 17

Product description and
specifications
Read all safety warnings and all instruc-
tions. Failure to follow the safety warnings and
instructions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The AdvancedShear 18V-10 Extension Pole is designed only
for use with the AdvancedShear 18V-10 for cutting edges
and shrubs at ground level.
Product Features (see figure A)
(1) Lock-off button for On/Off switch
(2) LED for lock-off
Technical Data
Extension pole (F016 800 608)
Article number
Rated voltage
Blade length
Blade width
Tooth opening
Max. extension pole length
A)
Weight
Serial number
Recommended ambient temperature during
charging
Permitted ambient temperature during operation
B)
and storage
Battery type
Running time at no-load
A) Depending on battery in use
B) Limited performance at temperatures < 0 °C
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Grass shear
Measured sound values determined according to EN IEC
62841-4-5:2021+A11:2021.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A).
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN IEC
62841-4-5:2021+A11:2021:
2 2
a < 2.5 m/s , K = 1.5 m/s .
h
Shrub shear
Bosch Power Tools
(3) Grass shear blade
(4) Release button for blade attachment
(5) On/Off switch
(6) Shrub shear blade
(7) Battery
a)
(8) Battery charger (country-specific)
(9) Battery port
(10) Release
(11) Product holder
(12) Button for rotating the product
(13) Button for rotating the head
(14) Extension pole
(15) Handle
(16) Auxiliary handle
a) This accessory is not part of the standard scope of delivery.
AdvancedShear 18V-10 Extension Pole
V
mm
mm
mm
cm
kg
See serial number (type plate) on the machine
°C
°C
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah, 4.0 Ah, 5.0 Ah, 6.0 Ah
Noise emission values determined according to EN
62841-4-2:2019+A1:2022+A11:2022.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A).
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN
62841-4-2:2019+A1:2022+A11:2022:
2 2
a = 2.5 m/s , K = 1.5 m/s ,
h
The declared vibration total value(s) and the declared noise
emission value(s) have been measured in accordance with a
standard test method and may be used for comparing one
machine with another.
English | 17
F 016 L78 884
18
−
100
−
115
1.2
+10... +35
-20... +50
PBA 18V...W-.
up to 85 minutes
F 016 L94 828 | (05.08.2024)