Installation Instructions; Installation Preparation - Whirlpool ADG 190 A+ Gebrauchsanweisung

INSTALLATION INSTRUCTIONS

ATTENTION The installation of the pipes and electrical equipments should be done by professionals.
WARNING:
Electrical Shock Hazard
Disconnect electrical power before installing dishwasher. Failure to do so can result in death or electrical
shock.

Installation preparation

The installation position of dishwasher should be near the existing inlet and drain hoses and power cord.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dishwasher.
NOTE: please check the accompanying installation accessories (hook for aesthetic panel, screw).
Please carefully read the installation instruction.
Illustrations of cabinet dimensions and installation position of the dishwasher.
Preparations should be made before moving the dishwasher to the installation place.
1. Choose a place near the sink to facilitate the installation of inlet and drain hoses (see figure 1).
2. If dishwasher is installed at the corner of the cabinet, there should be some space (illustrated in figure 2)
when the door is opened.
Electrical, drain
and water supply
line entrances
Space between cabinet
bottom and floor
Figure 1
Cabinet dimensions
Less than 5mm between the top of dishwasher and cabinet and the outer door aligned to cabinet.
52