Whirlpool ADG 190 A+ Gebrauchsanweisung Seite 51

Cleaning the Spray Arms
It is necessary to clean the spray arms regularly in
order to remove scale build-up caused by hard
water and thus prevent the blockage of spray arm
jets and bearings. We Suggest suggest poking the
blocked spray arm jets with a needle to ensure
good washing performance.
Keeping your dishwasher in good condition
• After Every Wash
After every wash, turn off the water supply to the appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
• Remove the Plug
Before cleaning or performing maintenance, always remove the plug from the socket.
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning
products. Only use a cloth with warm soapy water. To remove spots or stains from the surface of the
interior, use a cloth dampened with water and a little vinegar, or a cleaning product made specifically
for dishwashers.
• When not in Use for a Long Time
It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from
the socket, turn off the water supply and leave the door of the appliance slightly open. This will help
the door seals to last longer and prevent odours from forming within the appliance.
• Moving the Appliance
If the appliance must be moved, try to keep it upright. If absolutely necessary, it can be positioned on
its back.
• Seals
One of the factors causing odours to form in the dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this from occurring.
51
Unscrew