Sungrow SH3.0RS Schnelle Installationsanleitung Seite 2

EN
1 Contents may be periodical y updated or revised due to product development
is subject to change without notice, n no case shall this guide substitute for the user manual or related
notes on the device
2 Make sure to read over, fuly understand
other related regulations before installing the equipment
the website at http://support
side of the equipment
3 A1 operations can be performed
commissioning of electrical system, as well as dealing with hazards, have knowledge of the manual and of
the local regulations and directives
4 Before installation, check that the package contents are intact and complete compared
Contact SUNGROW or the distributor in case of any damaged
5 The cable used must be intact and wel insulated. Operation personnel must wear proper personal
protective equipment
6 Any violation cou d result n personal death or injury or device damage,
Safety
The Inverter has been designed and tested strictly according
safety instructions careful y prior to any work and observe them at al times when working on or with the
inverter, Incorrect operation or work may cause:
• injury or death to the operator or a third party;
damage to the inverter or other properties
Please follow the safety instructions related to the PV strings and the utility grid
A DANGER
Lethal voltage!
PV strings will produce
an electric shock
On y qualified personnel can perform the wiring of the PV panels
A NOTICE
Danger to life from electric shock due to lethal votage!
All electrical connections
On y with the permission
Inverter
The warning abel on the inverter body are as follows
AC P
10 min
and strictly fol ow the detailed instructions of the user manual and
sungrowpower com/; or it can be obtained by scanning the QR code on the
or the back cover of this guide
only by qualified personnel, that must be trained for installation and
(PPE) al the time
electrical power when exposed to sunlight and can cause a lethal voltage and
must be n accordance
of the local utility grid company, the inverter can be connected
Disconnect the inverter from all the external power sources before maintenance!
Do not touch live parts for 10 minutes after disconnection
Burn danger due to hot surface that may exceed 60 oc
The user manual can be downloaded
or mssng components
and will void the warranty
to international safety regulations. Read al
with ocal and national standards
The information in this guide
by visiting
to the packing list.
to the utility grid
from the power sources