Silvercrest 459226 2401 Bedienungsanleitung Seite 15

Setting the temperature
You can set a temperature range from 6° Celsius to 32° Celsius on
the fan heater.
♦ Press the button 1 to turn on the fan heater. The factory
preset temperature (
on the display 3.
♦ Press the
rature in steps of 1° Celsius.
♦ Press the
ture in steps of 1° Celsius.
Note: The fan heater only starts heating when the room tempe-
rature falls below the set temperature value.
As soon as the room temperature has reached the set temperature
value, the appliance stops heating until the room temperature
drops below the set temperature value again.
Set heating time
The appliance has a timer that you can use to set the desired heating
time between 1 to 24 hours. Once this heating period is over, the
appliance automatically switches to standby mode.
♦ With the appliance switched on, press the setting button
once. The indication 3 flashes in the display (continuous
operation).
♦ Press the
duration in steps of 1 hour.
♦ Press the
duration in steps of 1 hour.
│ GB │ IE
■ 12
) or the last-used temperature appears
button 7, button repeatedly to increase the tempe-
button 2, button repeatedly to reduce the tempera-
button 7, button repeatedly to increase the heating
button 2, button repeatedly to reduce the heating
4