Assembly; Fitting/Removing The Dust Box; Fitting/Changing The Sand Grid; Operation - Parkside Performance Paesp 20-Li A1 Bedienungsanleitung Und Originalbetriebsanleitung

˜ Assembly
˜ Fitting/removing the dust
box
(Fig. E, F)
WARNING! Risk of injury!
m
Always switch the product off,
remove the battery pack
and let the product cool
down before making any
adjustments .
NOTE
The adapter for dust box
u
installed on the dust box
When working vertical surfaces:
u
The dust box
2 ] [
downwards .
For optimum dust extraction:
u
Empty the dust box
Optional: The dust can be
u
extracted with a vacuum cleaner
(e.g. PWD 30 C1).
Fitting the dust box
1 . Fit the adapter for dust box
the extraction outlet
2 . Align on the adapter for dust
[ 1a ]
box with on the dust box
1 ] [
3 . Locking: Rotate the dust box
clockwise direction until
to .
Removing the dust box
1 . Rotate the dust box
clockwise direction until
to .
2 . Remove the dust box
adapter for dust box
External dust extraction
1 . Remove the adapter for dust box
from the extraction outlet
5 ] [
is pre-
[ 1 ]
.
[ 2 ]
has to face
regularly .
2 ] [
onto
[ 1 ]
.
17 ] [
.
[ 2 ]
in
[ 2 ]
points
1a ] [
in anti-
2 ] [
points
[ 1a ]
from the
[ 2 ]
.
[ 1 ]
1 ] [
.
[ 17 ]
2 . Connect the end of the hose coupler
to the extraction outlet
˜ Fitting/changing the sand
grid
(Fig. D)
WARNING! Risk of injury!
m
Always switch the product off,
remove the battery pack
and let the product cool
down before making any
adjustments .
1 . Align the shape of the sand grid
to the sanding attachment on the
product .
2 . Use the hook-and-loop fabric to
attach the sand grid
product .
˜ Operation
˜ Switching on/off
CAUTION! Risk of injury!
m
Always wear protective gloves
when handling or working with
the product .
CAUTION! Risk of injury!
m
Before switching on the product:
u
Ensure the sand grid
contact with the workpiece .
Ensure your stance is stable .
u
Always hold the product firmly with
both hands while working .
Keep your hands away from the
u
sand grid when the product is in
18 ] [

operation .

NOTE
The required orbital stroke rate is
u
dependent on the material and
the work conditions and can be
determined using practical tests .
.
17 ] [
5 ] [
18 ] [
to the
18 ] [
is not in
18 ] [
GB 15