Herunterladen Diese Seite drucken

Parkside Performance PAESP 20-Li A1 Bedienungsanleitung Und Originalbetriebsanleitung Seite 12

Vorschau ausblenden Andere Handbücher für PAESP 20-Li A1:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 81
NOTE
The vibration emission values and
u
the noise emission values given
in these instructions have been
measured in accordance with a
standardised test procedure and
can be used for comparison of the
power tool with another tool .
The specified total vibration values
u
and the noise emission values can
also be used to make a provisional
load estimate .
WARNING!
m
Depending on the manner in which
u
the power tool is being used and,
in particular, the kind of workpiece
being worked, the vibration and
noise emission values can deviate
from the values given in these
instructions during actual use of
the power tool .
It is necessary to establish safety
u
measures to protect the operator
based on an estimation of the
vibration load during actual use
(wherein all states of operation
must be included, e .g . times when
the power tool is switched off
and times where the power tool is
switched on but running without
load) .
General safety
instructions
˜ General power tool safety
warnings
WARNING!
m
Read all safety warnings,
instructions, illustrations
and specifications provided
with this power tool. Failure
to follow all instructions listed
below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool .
Work area safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents .
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes .
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control .
Electrical safety
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock .
GB
9

Werbung

loading

Diese Anleitung auch für:

472728 2401