ZACO A10 PLUS Bedienungsanleitung Seite 20

Product Operation
Operating instructions
Power On / Power Off
Press and hold the Power button for 3 seconds. When the indicator light is on, the robot
has booted up successfully. If the robot vacuum cleaner is in standby mode, press and
hold the Power button for 3 seconds. When the indicator light turns off, the device has
successfully powered off.
Note
The robot vacuum cleaner cannot be switched off during the charging process.
Cleaning / Pause
After the robot vacuum cleaner is turned on, you have three options to start the
cleaning process:
1. Press the Home button on the robot.
2. Use the mobile app.
3. Use Alexa or Google Home voice control.
Note
• The robot vacuum cleaner should not be used for cleaning liquids.
• lf the battery capacity is less than 20%, the robot cannot work; therefore,
charge the machine before cleaning.
• When the battery charge is less than 15%, the robot will stop cleaning and
return to the self-emptying charging station to recharge the battery.
• Make sure that there are no cables in the way. The robot can get tangled in
loose cables and can also pull the cable out of the socket. Under certain
circumstances, this can lead to damage to electrical.
20
Find more information at www.zaco.eu
English EN