Silvercrest SSVF 38 A2 Bedienungsanleitung Seite 18

m WARNING! Risk of
electric shock! If the supply
cord is damaged, it must be
replaced by the manufacturer,
its service agent or similarly
qualified persons in order to
avoid a hazard .
Only use the product in dry
indoor rooms .
Protect the product, its mains
cord and mains plug against
dust, direct sunlight, dripping
and splashing water .
m CAUTION! Risk of injury!
Ensure that the fan is switched
off from the supply mains
before removing the guard .
m CAUTION! Risk of injury!
Never use the product without
the safety grille or with a
damaged safety grille .
m CAUTION! Risk of injury!
During use, keep hands, hair,
clothing and utensils away
from the safety grille to avoid
injuries and damage of the
product .
˜ Before use
˜ Unpacking
Remove the packaging . Check if the product
o
is damaged .
˜ Assembly
Number of persons needed for assembly:
1 adult
Fig. Step
1 . Push the 4 base legs
B
base connector
in place .
1 . Loosen the height adjustment
lock on the extension pole
11 ] [
C 2 . Pull out the extension pole
3 . Place the lower pole
base connector
1 . Turn the lower pole
clockwise to lock it into the base
D
connector
2 . Tighten the height adjustment
lock at the desired height .
[ 11 ]
1 . Remove the grille lock nut
the motor unit
E
2 . Attach the rear grille
motor unit
3 . Tighten with the grille lock nut
1 . Place the blade
shaft .
[ 6a ]
F
2 . Tighten with the blade lock
nut .
2 ] [
1 . Open the 4 grille clips on the
front grille
2 . Remove the lock screw and
the lock nut
grille .
[ 1 ]
3 . Hang the hanger of the front
grille
1 ] [
G
4 . Insert the lock screw
the lock nut
clips at the grille frame .
INFO: The 4 grille clips must
fit over the frame of the rear
grille .
[ 5 ]
into the
[ 14 ]
until they click
13 ] [
10 ] [
.
10 ] [
on the
[ 12 ]
.
[ 13 ]
12 ] [
.
[ 13 ]
from
4 ] [
.
[ 6 ]
to the
5 ] [
.
6 ] [
[ 4 ]
on the motor
[ 3 ]
.
1 ] [
from the front
15 ] [
on the rear grille .
5 ] [
. Fasten
[ 15 ]
. Close the 4 grille
15 ] [
GB/IE
.
.
17