Herunterladen Diese Seite drucken

Powerfix Profi HG01699 Bedienungs- Und Sicherheitshinweise Seite 15

Vorschau ausblenden Andere Handbücher für HG01699:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

with STF (standard tension force) may be used for friction lashing.
Use the S hook to securely attach the lashing strap to the load.
j
Open the ratchet handle
j
the webbing
Insert the webbing
j
the slotted shaft
Tighten the lashing strap by moving the handle of the ratchet backwards and forwards (see
j
Fig. A I - III). Tighten the lashing strap until you have obtained the tension you wish to have.
Note: Make sure that webbing
times around the slotted shaft
Bring the ratchet handle
j
Releasing the lashing strap
Q
CAUTION! Check before releasing the strap that the load is stable. Make sure that
the load is stable even without the lashing strap and that it cannot fall down.
CAUTION! RISK OF INJURY! Make sure that nobody is near the load when you
release the lashing strap. Falling parts could cause injuries.
CAUTION! RISK OF INJURY! When opening the lashing equipment, the preload force
is released at a stroke. That is why you should open the lashing strap with the utmost caution.
Note: Before starting to unload, make sure that the lashing equipment is released so that
the load can be lifted freely.
14 GB
and place the slotted shaft
1
can be inserted into it (see Fig. A III).
4
into the slotted shaft
4
until the webbing
3
4
.
3
into the basic position (see Fig. A I). The load is now secure.
1
of the ratchet. Carefully pull it through
3
lies snug against the load.
4
is wound at least 1.5 times to a maximum of 3
into the position so that
3

Werbung

loading

Diese Anleitung auch für:

292210