32
4. Operation
4.4 Switching off
Keep
- Display switches off, instrument is switched off.
Auto-OFF function
If no buttons are activated over a period of 5 minutes, the
instrument switches itself off.
f the HOLD function is activated, the Auto-OFF function is
deactivated (See
5.
Information on the operating sequence of instrument
configuration
If no button is pressed for 3s while in the configuration
mode, the instrument changes to the next setting option!
The TPM limits can be between 4 and 40%. However, the
upper limit value (A-Hi) has to be at least 1% higher than the
bottom limit (A-Lo).
Operating sequence
Switch on instrument and keep
1
the display test.
- The instrument switches to configuration mode:
A-Hi and the limit value set for TPM light up.
Set upper limit value using
2
pressed to fast-forward).
Do not press any button for 3s.
3
- A-Lo and the bottom set limit value for TPM appear.
Set bottom limit using
4
to fast-forward).
Do not press any button for 3s.
5
-
pressed for approx. 3s
4.2 M
EASURING
Configuring instrument
and on or OFF appear.
, Section
HOLD
pressed during
or
or
(keep button pressed
)!
FUNCTION
(keep button