testo 265 Bedienungsanleitung Seite 31

the measurement. Minimum distance from metal parts:
1cm on one side.
Immerse sensor in deep-fried oil. Adhere to
1
immersion depth!
Wait for adaption time (approx. 10s).
2
- Measurement is finished once the temperature
display does not change significantly. .
The TPM value (polar components) is only
displayed if the temperature is inside the
measurement range (+40 to +210 °C).
Take readings.
3
Limit values
It is recommended that cooking oil is changed from
approx. 24% TPM. However, the limit value differs from
country to country. If the measured values exceed the limit
value of the country, the cooking oil should be changed.
Hold function
Press
- HOLD is shown in the display, the readings are
frozen.
The Auto-OFF function is deactivated if the HOLD function
is activated (See
Press
- HOLD goes out, current readings are displayed.
briefly (< 1s)
4.4 S
WITCHING OFF
again.
)!
4. Operation 31