Basic Safety Measures - testo 265 Bedienungsanleitung

24

1. Basic safety measures

1. Basic safety measures
Avoid electrical hazards:
Never make measurements with the unit and its probes
on or near live components unless the unit is expressly
approved for current and voltage mesurements.
Protect the unit:
Never store the unit together with solvents (e.g.
acetone).
The housing parts should not come into contact (e.g.
splashes, accidental submersing) with the cooking oil.
Preserve product safety/warranty entitlement:
Operate the instrument only within the parameters
specified in the technical data.
Please handle the instrument with care. Force should
never be applied.
The temperature data for the probes only refer to the
sensor measuring range. Never subject handles or pipes
to temperatures greater than 70°C unless they are
expressly approved for higher temperatures.
The instrument should only be opened for maintenance and
repair work if expressly described in the Instruction manual.
Only carry out the maintenance and repair work
described in the Instruction manual. Please follow
instructions. For safety reasons, only original spare parts
from Testo should be used.
Any other work should only be carried out by authorised
trained personnel. Otherwise responsibility for the
perfect functioning of the instrument following repairs
and for the validity of approvals will be denied by Testo.
Ensure correct disposal:
Dispose of defective rechargeable batteries and spent
batteries responsibly.
You can return your instrument directly to us at the end
of its service life. We will dispose of it responsibly.