Assembly and Instruction Manual for Busch+Müller turn direction indicators (indictors) Turntec
Approved for bicycles and pedal-assist bicycles (e-Bikes)
1. General
These instructions are directed at persons with knowledge and experience in the assembly of bicycle
components. Specialist tools may be required. Should you not have such experience or the required
tools please enlist the service of a cycle specialist to ensure that this assembly is carried out correctly.
Improper assembly may result in a fall or crash resulting in serious injury. Please read these instruc-
tions thoroughly and retain them for future reference, follow all the steps described and keep it in a
safe place.
2. Safety information
This Instruction Manual uses signal words to draw your attention to potential hazards or important
information.
The meaning of the signal words is listed below:
WARNING
Describes a hazardous situation which, if not avoided, could result in a fatal accident
or serious injury.
NOTICE
Indicates information considered important, but not hazard-related (e.g. information related
to property damage).
!
The
symbol is used to provide other useful information about your new bicycle lights.
22
3. Intended use
Busch + Müller produce an extensive product range of bicycle components. Not every component
is suitable for each application or every terrain. Should you be unsure about which type of com-
ponent you require for your intended use, you may either contact our service-hotline under +49
2354 915 7111, or by E-mail to service@bumm.de or request advice from a specialist retailer.
NOTICE
Bicycle components from Busch + Müller are suited to riding conditions on a firm riding
terrain. Avoid use under extreme circumstances and never ride down steps or stairs. Do not use
B+M components while performing jumps, stunts, tricks, hops or fast descents on uneven terrain.
4. Legal requirements
Before you operate your vehicle in public traffic, you are obliged to ensure that your vehicle com-
plies with national and local laws and regulations, and you, as a traffic participant must abide by
the traffic regulations that apply. These can be found in the Highway Code or national equivalent,
and depending on the country, also at other sources.
!
Never cover or conceal your bicycle indicator lights. Always make sure the bicycle indicator
lights are correctly positioned.
In Germany, the prescribed mounting height ranges between 35 and 120 cm. As prescribed by
the Road Traffic Regulations the indicators must be mounted to meet the requirements of the
UNECE-Regulation R 74. For details, consult your National Road Traffic Regulations or contact a
local bicycle specialist retailer.
23