Herunterladen Diese Seite drucken

Renson FIXSCREEN GO Montageanleitung Seite 20

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
Fixscreen
®
6 • Maintenance
The system does not need much maintenance, but for years of enjoyment, we advise the
following:
• If the fabric becomes wet in a sudden storm, you can still roll it up and unroll it later
to dry when the weather is better. However, avoid having the wet fabric rolled up for
more than three days to prevent formation of mould and spots.
• Before cleaning, remove any loose dirt with a brush or vacuum cleaner. You can
then use a cleaning product (avoid caustic products) and warm water to remove the
remaining dirt. Always rinse the fabric after cleaning. Avoid cleaning in full sunlight: if
soapy water dries quickly, it can leave spots on the fabric.
Do not use aggressive abrasives.
• If anodised or enamelled profiles become dirty, they can be cleaned with warm water
and a gentle-acting cleaning product. Never use aggressive products, abrasive
sponges or other abrasive media.We also advise against using high-pressure
equipment.
• Swivelling or rotating parts should be lubricated annually. Use a dry lubricant for this
(PTFE Flex Lube (1287)).
• After cleaning (remove twigs and leaves), plastic sliding sleeves can be lubricated with
a dry lubricant (PTFE Flex Lube (1287)).
• Frequently control your product on twigs, leaves, bird nests, ets. and remove them.
Maintain the product "as a good keeper".
• As the manufacturer, we recommend having a regular technical inspection by your
installer: annually at public utility building and at your private home.
• Always use original parts from the manufacturer.
Important to know:
• The main connection should be made by a qualified electrician in accordance with
applicable standards.
• Minor colour variations may occur during the manufacturing process between the
colour guides and the profiles of the sunprotection screen. There may also be minor
colour differences between components and profiles.
• The fabric may exhibit slight colour nuances and imperfections.
• Because the fabric is rolled up, it can form folds or creases.
• Over time, the colour of the fabric may fade slightly, depending on the chosen colour
and design.
• In the case of straight screens, where the fabric hangs down vertically because of
the weight of the bottom rail or a tensioning system, wrinkles can form in the fabric
depending on the type of screen.
20
Go
(see also our warranty certificate*)
* This information does not replace the warranty certificate.

Werbung

loading