cecotec POWER ESPRESSO 20 PRO Bedienungsanleitung Seite 38

ENGLISH
First cleaning
Warning: clean the coffee machine before using it for the first time to remove all possible
manufacturing residues.
1. Pour water into the water tank, do not exceed the "MAX" mark, and place the water tank in
its correct position.
2. Insert the portafilter and filter (empty) in their position.
3. Place a cup on the cup-warming tray. Make sure the steam knob is turned completely
clockwise.
4. Connect the machine to the mains and press the power button. The red indicator light will
light up indicating the machine is preheating.
5. Press the coffee button for the pump to start pumping water.
6. To stop this process, press it again.
7. The indicator light will light up when the preheating process is finished.
8. Press the coffee button for the machine to dispense water.
9. Once the machine has finished dispensing water, throw away the remaining water and
clean all containers thoroughly.
10. Now, the machine is ready to be used.
Warning: when activating the pump for the first time, the appliance may make some noises
which will disappear after 20 seconds. This is because the machine is releasing air and is
completely normal, it does not affect the operation.
3. OPERATION
1. Fill the water tank with water, up to the MAX mark. Place the water tank upright so that the
tabs are correctly aligned with the slots at the back of the appliance, then push it down
until it clicks into place.
2. Remove the portafilter from the packing box. Put one of the filters into the portafilter
making sure that the slots on both accessories match. Fig. 2
3. Next, insert the portafilter into the appliance head and turn it until it clicks into position.
The portafilter arm must be aligned with the locking position «
4. Plug the machine into a mains socket and press the power button «
corresponding indicator light will turn on and the appliance will start preheating
automatically.
5. During the preheating process, the coffee button indicator light «
the steam knob is in the OFF position. If it is not, all three indicator lights will start flashing
at the same time and the appliance will not start.
6. When the coffee indicator light «
position to dispense hot water and clean the filter or cup.
38
POWER ESPRESSO 20 PRO
» remains steady, turn the steam knob to the ON
».
». Next, the
» will flash. Make sure