Manual Preset; Storing Stations In Memory; Fm Station Automatic Preset: Ssm - JVC ks-f172 Bedienungsanleitung

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1
Select the FM band (FM1 – 3) you
want to store FM stations into.
FM FM1
2
Press and hold both buttons for
more than 2 seconds.
SSM
(For KS-FX222)
"- -SSM- -" appears, then disappears
when automatic preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number buttons—
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
FM2 FM3
SSM
(For KS-F172)

Manual preset

You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band.
1
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
FM
AM
AM
2
Tune in to a station (in this example,
of 88.3 MHz).
To tune in to stations of higher frequencies
(For KS-FX222)
To tune in to stations of lower frequencies
CONTINUED ON THE NEXT PAGE
FM1 FM2 FM3
(For KS-F172)
9