Selecting Preset Sound Modes; Storing Your Own Sound Adjustments - JVC ks-f172 Bedienungsanleitung

Selecting preset sound modes

You can select a preset sound adjustment
suitable to the music genre.
Select the sound mode you want.
SCM
Each time you press the button,
the sound mode changes as
follows:
SCM OFF
Indication For:
SCM OFF (Flat sound)
BEAT Rock or disco
music
SOFT Quiet
background
music
POP Light music
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments"
below.
• To adjust the bass and treble reinforcement levels
or to turn on/off the super bass function, see page
13.
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
14
(BEAT)
(SOFT) (POP)
Preset values
BAS TRE S.BASS
00 00
+2 00
+1 –3
+4 +1
1
Call up the sound mode you want to
adjust.
SCM
2
To adjust the bass or treble level
1 Select "BAS" or "TRE."
SEL
2 Adjust the level.
OFF
ON
OFF
To turn on or off the super bass
S.BASS
OFF
3
Repeat step 2 to adjust the other
items.
4
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
SCM
5
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on the left
column.
• See the left column for
details.
Each time you press
S.BASS, the super bass
function turns on and off
alternately.
Your adjustment made for
the selected sound mode is
stored in memory.