Kuppersberg RBN 1763 Technischer Pass Seite 54

TECHNICAL PASSPORT
Integrated fridge freezer
ERROR TYPE MEANING
Freezer
E09 compartment is
not cold enough
Fridge
E10 compartment is
not cold enough
Fridge
E11 compartment is
too cold
If you are experiencing a problem
with your appliance, please check the
following before contacting the after-
sales service.
54
WHY
 Set the freezer temperature to a colder
value or set Super Freeze. This should remove
the error code once the required temperature
has been reached. Keep doors closed to
improve time taken to reach the correct
temperature
Likely to occur
 Remove any products which have thawed/
after long term
defrosted during this error. They can be used
power failure
within a short period of time
 Do not add any fresh produce to the freezer
compartment until the correct temperature has
been reached and the error is no longer
If this warning continues an authorised
technician needs to be contacted
 Set the fridge temperature to a colder
value or set Super Cool. This should remove the
Likely to occur
error code once the required temperature has
after:
been reached. Keep doors closed to improve
 Long term
time taken to reach the correct temperature
power failure
 Please empty the location at the front area
 Hot food has
of air duct channel holes and avoid putting
been left in the
food close to the sensor.
fridge
If this warning continues an authorised
technician needs to be contacted
 Check is Super Cool mode is activated
 Reduce the fridge compartment
temperature
Various  Check to see if vents are clear and not
clogged
If this warning continues an authorised
technician needs to be contacted
Your appliance is not operating
Check if:
 There is power.
 The plug is correctly placed in the
socket.
ENGLISH
WHAT TO DO