Parkside PSSFS 3 A2 Bedienungs- Und Sicherheitshinweise Seite 12

˜ Use
˜ Switching on/off
Switching on: Press the
lights up . The built-in buzzer beeps once .
Switching off: Press the
LED goes off . The built-in buzzer beeps twice .
Automatic power off: If the product is not in use for
more than approx . 5 minutes, the product automatically
powers off itself . Press the
product again .
Disabling the buzzer's beep sounds during operation
Switch off the product (see "Switching on/off") .
Press and hold the
up . The built-in buzzer beeps once . The buzzer is now
disabled until the product is switched off .
˜ Detecting AC voltage
Testing the product's functionality
Switch on the product: Press the
LED lights up . The buzzer beeps once . The product is ready
for AC voltage detection .
Move the tip
socket-outlet) . If the red LED flashes and the built-in buzzer
beeps once, the product can be used .
Detecting AC voltage
Check if the product his still switched on (The green LED
remains on) .
button
close to a known AC voltage (such as a
6 ] [
button . The green LED
1 ] [
button again . The green
1 ] [
button to power on the
1 ] [
until the green LED lights
1 ] [
button
1 ] [
. The green
GB 13